TDPAC and first-principles study of electronic and structural properties of a Pd-vacancy complex in undoped germanium

Pd is one of the metals suitable for inducing low-temperature crystallization in Ge. However, it is not clear how residual Pd atoms are integrated into the Ge lattice. Therefore, time-differential γ–γ perturbed angular correlations (TDPAC) technique using the ¹⁰⁰Pd(→¹⁰⁰Rh) nuclear probe produced by recoil implantation has been applied to study the hyperfine interactions of this probe in single-crystalline undoped Ge. A Pd-vacancy complex aligned along the <111> crystallographic direction with a unique interaction frequency of 8.4(5) Mrad/s has been identified. This complex was measured to have a maximum relative fraction of about 76(4)% following annealing at 350 ^°C. Further annealing at higher temperatures reduced this fraction, possibly via dissociation of the complex. Calculations suggest dissociation energy of 1.94(5) eV for the complex. DFT calculations performed in this work are in reasonable good agreement with the experimental values for the electric-field gradient of the defect complex in Ge and Si for comparison. The calculations predict a split-vacancy configuration with the Pd on a bond-centred interstitial site having a nearest-neighbour semi-vacancy on both sides (V-Pd_BI-V) in Ge and Si.     

Investigation of hypersonic nozzle flow uniformity using NO fluorescence

Planar laser-induced fluorescence visualisation is used to investigate nonuniformities in the flow of a hypersonic conical nozzle. Possible causes for the nonuniformity are outlined and investigated, and the problem is shown to be due to a small step at the nozzle throat. Entrainment of cold boundary layer gas is postulated as the cause of the signal nonuniformity. PACS 47.80.Jk, 47.40.Ki, 47.60.+i     

Smart Geodesic Tracing in GRworkbench

We have developed a new tool for numerical work in General Relativity: GRworkbench. We discuss how GRworkbench's implementation of a numerically-amenable analogue to Differential Geometry facilitates the development of robust and chart-independent numerical algorithms. We consider, as an example, geodesic tracing on two charts covering the exterior Schwarzschild space-time.     

Adaptive Algorithm for Constrained Least-Squares Problems

This paper is concerned with the implementation and testing of an algorithm for solving constrained least-squares problems. The algorithm is an adaptation to the least-squares case of sequential quadratic programming (SQP) trust-region methods for solving general constrained optimization problems. At each iteration, our local quadratic subproblem includes the use of the Gauss–Newton approximation but also encompasses a structured secant approximation along with tests of when to use this approximation. This method has been tested on a selection of standard problems. The results indicate that, for least-squares problems, the approach taken here is a viable alternative to standard general optimization methods such as the Byrd–Omojokun trust-region method and the Powell damped BFGS line search method.     

AERODYNAMIC DAMPING OF RANDOMLY EXCITED PLATES IN STATIONARY AND MOVING AIR

An experimental study of the aerodynamic damping of oscillating plates has been undertaken. Plates of various shapes were placed into an air flow normal to the plate and excited to oscillate parallel to the flow direction by electromagnetic forces of equal amplitudes and random frequencies. The aerodynamic damping of oscillating plates, evaluated in terms of a quality Q-factor from a frequency response resonance curve, was found to vary linearly with the absolute pressure in stationary surrounding air and with the air flow velocity in moving air. The flow velocity was also found to affect the aerodynamic damping more than the absolute pressure. A simple empirical model has been developed to predict the variation of the aerodynamic damping with the flow velocity.     

In situ neutron diffraction study (300-1273 K) of non-stoichiometric strontium ferrite SrFeOx

The high-temperature cubic phase of non-stoichiometric strontium ferrite SrFeO_x (2.5≤x≤3.0) has been studied by in situ neutron powder diffraction in air over the temperature range 300-1273 K. The composition of SrFeO_x changes within the range 2.56≤x≤2.81 from 1273 to 673 K, respectively.Rietveld refinements of the diffraction patterns show that the high-temperature cubic phase of SrFeO_x is consistent with a face-centred Fm3c structure. This structure leads to agreement with previous density measurements. This cell allows the high-temperature structure of SrFeO_x to be described in terms of a solid solution of the composition end members. Cubic SrFeO_x at high temperature is found to closely obey Vegard's law. The density of cubic SrFeO_x is also found to exhibit a linear relationship with composition.     

Oscillating viscoelastic flow in a curved duct—Exact analytical and numerical solution

The analytical solution of the equations of motion is presented for a fully developed laminar flow in a curved channel with circular walls, when an oscillating circumferential pressure gradient is imposed (finite gap oscillating Dean flow). The fluid studied, is a viscoelastic (Jeffrey) fluid. The validity of the solution is verified by a finite difference numerical method.     

Formulation of hybrid Trefftz finite element method for elastoplasticity

The present investigation provides a hybrid Trefftz finite element approach for analysing elastoplastic problems. A dual variational functional is constructed and used to derive hybrid Trefftz finite element formulation for elastoplasticity of bulky solids. The formulation is applicable to either strain hardening or elastic-perfectly plastic materials. A solution algorithm based on initial stress formulation is introduced into the new element model. The performance of the proposed element model is assessed by three examples and comparison is made with results obtained by other approaches. The hybrid Trefftz finite element approach is demonstrated to be particularly suited for nonlinear analysis of two-dimensional elastoplastic problems.